Questions & Answers for: kitchenaid mixer release

...release it fromt he mixer but it won't budge. Will it turn at all? Try to soak it. Put a paper towel strip where the beater locks onto the shaft and soak ot with window cleaner. Let it soak for a ...

...release key? Recieved standing mixer used and may just be gummed up. Don't want to break something trying to pull the blade out. Have tried spraying a cleanser to soak it loose. you need to lift the ...

can't get the mixer blade off clean the shaft area where your blade connects . that might be stopping you from pushing upwards to release the blade

mixer cannot release(remove) beater The beater is held in place by a pin and spring arrangement. Lift and twist the beater. If that doesn't work, the pin is trying to come out...and is wedging against

how do you release the wisk Hello. Actually, the wisk releases just like the other attachments do......... just lift and twist it 1/4 turn.

...on mixer....no leverage when I push up to release. #KSM90 Poor some wesson oil into attachment socketin the head and work it a little by hand ----Unplug first. Work the release button and

...mixer. No leverage when I push up to release. Tried WD40 Still stuck? It may need to be turn backwards by hand . poswsibly jammed on locking mechanism Try twisting it back and forth. . make sure to ...

...mixer for overseas sales, but I do not know if they do. You can contact KA Customer service directly on their website at: http://www.kitchenaid.com/flash.cmd?/#/page/customer-service/ Check the ...

...KitchenAid mixer. You have a Hobart mixer, which is another brand altogether. You might try the Hobart website and seek assistance directly through them. They tend to be very close lipped about ...

mixer. It will not move, or twist to the side to release. Use a small amount of vegetable oil to lubricate the beater shaft and the beater. Slightly tap the beater up and sideways with a rubber mallet