Question about KSM5PS Heavy Duty Stand Mixer
KitchenAid 325 Heavy Duty Stand Mixer runs with low power & clicking noise My KitchenAid 325 Heavy Duty Stand Mixer broke after attempting to knead a double batch of stiff bread dough. Now it still ...
...kitchenaid mixer. It has been barely used but makes a alot of noise at the planetary gear. When I turn it on at low speed (2 or 3) it starts slow but then when it gets up to speed it makes a whining ...
Question about K5SS Heavy Duty Commercial Stand Mixer
Kitchenaid mixer (k5ss lift bowl?) smells hot My Kitchenaid mixer (k5ss lift bowl?) smells as soon as I start using it. It makes an intermittent noise at lower speeds, best described as a groan or low
...noise when in use, and the lowest and highest gears don't work. Machine is about 20 yrs old. This sometimes happens when the two nuts holding the motor in place become loose. To check, open up the ...
...put a drop of Loctite on the pin and reassembled, has not sound this good in ages...Great instructions here: ...
Question about KSM90 Ultra Power Series Stand Mixer
...noise the higher you turn up the speed the slower it becomes. It sounds like the Worm Gear is going out. The faster the motor runs, the more damages the Center Gear is grinding away the teeth of the ...
Question about K45SS Classic Stand Mixer
...mixer problem. When it is on the lowest setting it hums and the beaters barely turn. The next setting up has a noise but the higher speed settings work just fine. What is the problem? the lower ...
Question about K5SS Heavy Duty Commercial Stand Mixer
kitchenaid mixer makes a clattering sound at low speeds - seems to be coming from the governor or the control plate - any ideas, is this a common problem and how should I approach it? My old mixer - ...
low speed noise Machine makes a strange grinding noise but only on low speed. It works and sounds fine on higher speeds. The governor looks ok/ Check that the nuts under the back cover at the sides ...
Question about K5SS Heavy Duty Commercial Stand Mixer
KitchenAid K5SS Stand mixer motor runs and attachments spin, but there is barely any torque. You can stop the paddle with your hand. You can stop the spinning paddle with your hand without any effort
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions