...of lock and unlock lever Need to know how to replace lock and unlock lever. Thanks, John Look for my posts on "Removing the motor cover". The lock is under the motor head. Its easy to find and
Kitchenaid artisan ksm150 - Motor Head Locking Lever stuck in locked position Get a copy of the Repair Part List of your model from Kitchenaid.com Remove the Motor Housing (1). The Latch Lever (3) is ...
Question about KITCHEN AID 5 Quart Artisan Series Stand Mixer
...artisan mixer is loose and shaking This could be the pivot rod between the head and the column being loose and out of place. Or it could be the hook activated by the lock lever not engaging properly. ...
Question about Artisan Series Tilt-Head Stand Mixer
kitchenaid mixer head lock lever his hard to move & sticks Hiya, I am sorry to hear you are having problems with your appliance. Below I have added a link for our help page on removing and ...
Question about KSM150PS Artisan Series Stand Mixer
Mixer head won't lift up as the silver lever is locked Put some pressure on the lever and at the same time give it a thump on the top at the front end with the heel of your hand.
...lock button is trying to click but except for a little movement it will not release. Hello there, Sorry to hear you are experiencing an issue with your appliance, it sounds like you might need a new ...
Question about KSM150PS Artisan Series Stand Mixer
kitchenaid mixer motor head locking lever? lever is lose as you slide it from unlock to lock position and will not stay in locked position. Can it be tightened. OBTW the beater does not touch the bowl
Question about KSM150PS Artisan Series Stand Mixer
...kitchenAid artisan mixer How do remove the main cover Remove back cap, remove white wire and black wire from lower corner of speed control plate, both on same side on adjacent terminals. Remove the ...
Question about KSM150PS Artisan Series Stand Mixer
...artisan head will tilt but wont stay up On the same side as the head lock lever at the back of the pedestal there is normally a small plastic part that the locking lever can hook under. It is held on ...
Question about KSM150PS Artisan Series Stand Mixer
...Artisan Kitchenaid mixer KSM150 out of the box, head won't lock. Lever won't slide all the way to lock. Locks slightly but still has up and down play in down position and won't lock at all in tilted ...
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions