Questions & Answers for: kia sportage cam shaft sensor

cam shaft sensor is located The cam shaft position sensor is located right behind the exhost cam by the fire wall. It is held by two 10 mm bolts, one on each side of the sensor. If you got the hood up

Kia Sportage will not start. Here is what I have tried so far. Replace timing belt 10,000 miles ago, bench tested fuel pump. replace throddle & cam shafte sensor, crank shaft position sensors, two

...kia-sportage-forum/54034-kia-camshaft-sensor.html i done a diesel one a wekk ago and the sensor was on the head about a third of the way from the front of the engine ,Just do not see petrol ones here ...

Plugs, oil, oil filter have been changed,and the cam shaft sensor has also been changed. It is still miss firing. ??? check your ciol pack.

...kia sportage cranks hard. I get it started but when I drive it or let it run for a little while it will not start back up/ It will fire and act as if it will crank but will not/ I have put new fuel ...

...so the cam positioniing sensor can read it Typically no, the cam positioning sensor typically reads a marking of sorts on the end of the cam, telling the computer the proper position of the cam

...a kia sportage and the immobilizer was taken out it has spark and fuel but doesn't start. Timing is good crankshaft sensor and cam shafts sensor is good as soon well!! I'm stumped find the vacuum ...

...Kia Sportage 4x4 cram shaft sensor Have the same problem in our 2002 Spectra. The bad news we received was that in 2002 Kia put some not so good engine blocks in that allowed the crank keeper key to ...

...kia sportage v6, check engine light comes on I get 0430 code changed the cam shaft position sensor, don't know what to do next. It has 80,000 miles You should read this series of threads: ...

Kia Sportage The camshaft position sensor is located on the backside of the head, driver's side, and obtains it's signal from the exhaust cam. It is very difficult to see. It is bolted to the backside