Questions & Answers for: key turn ignition mitsubishi

Question about 2002 Lancer

2 Answers

...turn the key at. If it has spark and you have checked everything else . When you turn on the key, the dashlights , are supposed to turn on and then go off as you turn further to start the car. If ...

Ad

...key and repeatedly turn on and off and finally the car would start. mechanic said need new ignition switch other mechanic stated need new ignition relay system 3rd mechanic stated need new solinoid. ...

Ad

...the key tfat broke off stick it in ignition and push in to turn back or wiggle steering wheel back and forth while you turn key back if that dont work tou will have ti replace ignition ...

Question about 2000 Montero Sport

2 Answers

key wont turn in ignition. Dont want to hear the key is bent. Tried everything to get it to turn, but wont. It happened earlier today and after 20 minutes of giggling the key it finally turned over. ...

I have a 2003 Mitsubishi Outlander. The ignition is locking up so I am unable to turn the key to start the car. Is there a simple solution for this problem? Try some graphite lubricant.

Question about 2002 Montero Sport

1 Answer

...key into ignition.turn ignition switch on position for 5 seconds.switch off the ignition and remove key.wait 7 seconds insert new key into ignition switch.and switch ignition on until alarm system ...

...turn the key until it clicks once. This starts the car's battery, but doesn't ignite the engine. The LED light on the dashboard should stop blinking, indicating the alarm is temporarily disabled. 2 ...

Question about 2002 Lancer

1 Answer

...key the ignition keys won't turn to the lock position so I can take keys out of the car make sure shifter all the way in park,turn steering wheel back and forth while turning key to lock and remove ...

...over with key. Starter and battery measure good, fuses are ok. What am I missing??? All dash lights come on strong and bright when I turn the key. Ignition switch could be bad or fusible link

...key is in the ignition. To reset the alarm on the Mitsubishi Eclipse You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...