Questions & Answers for: key fob work fuse

...key fob 5 times. Try your other fob. Change the battery in your key fob If you have more than one key fob on your key chain, remove it and try again. The other fob could be causing interference with ...

...key fob tried re-programming the key fobs and they still dont work do you have any ideas cheers Dave. have you checked the fuses in the fuse panel. make sure you check them all sometimes manufactures ...

...key fob does not work The key fob does not work. Replaced the battery and reprogrammed but still will not work. Checked key fob at autozone and it is working. Bought a new fob and it did not work ...

Key fobs not working XK8 convertable 2002 XK8 4.2,all fuses look okboth key fobs not working have had same tested and not faulty , new batteries. have tried the reset ,no good module dry no obvious ...

key fob battery is dead: This is one of the most common reasons why your car door lock is not working. If your locks aren't working, replacing the battery in the key fob could solve the issue. The key

key fob - Try using that key fob - if it does not work, and you can verify the Batteries in both Fob's are good - it could be a couple different things. 1. your security system control box may be 'bad

...Key Fob doesn't work Key fob seems to be working red light on the fob turns on i'm able to start the car no horn no wipers no seats windows don't roll up or down and no blinkers unplug all your fuse ...

...key fob stopped working again I've checked the fuses I've changed the batteries I reset the key fob and nothing works any ideas P S. I've had this car for 3 months and this is the third time it's ...

...key fob as a key but not using the fob buttons remotely I have changed the key fob battery including the spare fob but still doesn't work I had a new main car battery fitter on 5/12/22 NO CAR TOLD AT ...

key and fob, and my side loading door is permanently locked, how do i get the ... 1 answer · Top answer: Look above accelerator pedal, there should be 2 fuses taped to the loom, check they haven't ...