Questions & Answers for: kenwood external switch

Question about KVT-617DVD Car DVD Player

2 Answers

...Kenwood KVT-617DVD unit is only playing sound through the rear speakers on Tuner. The sound does not play when on DVD/CD or External Media/IPod But the monitor shows that the CD or DVD or IPod plays ...

Ad

Question about KVT-617DVD Car DVD Player

2 Answers

...Kenwood head units uses the following wiring/color scheme: Yellow - always on B+12VDC such as the positive terminal of the battery; Red - switched B+12VDC such as the ACC terminal of the IGN switch; ...

Ad

Kenwood KDC-X589: yellow - always on B+12 such as battery + terminal red - switched B+12 such as ACC of IGN switch black - body/chassis ground (- battery) orange/white - dimmer control wire (car light

Question about KDC-MP5032 CD Player

1 Answer

...kenwood, when i turn off the built in amp. all the sound goes away. I am able to switch between tuner sattelite radio and cd, but all sound is completely off. I understand the main purpose of this ...

Question about KDC-MP205 CD Player

2 Answers

...external amplifiers. I can you further if you give me the make and model. Also, good info could be found on details of your unit at www.crutchfield.com. I am having this same problem with my Kenwood ...

kenwood KRC-930 is turned all the way up but still there is little noise Check the external speaker socket as the switch side of it could be dirty cutting the signal to the internal speaker. Also some

Question about KD-291RC Turntable

1 Answer

Kenwood Amplifier A-322, on playing record player sound is very quiet. On a previous record player (P-110) there was a switch on the underside. I can't find either model you mention anywhere but a

...Kenwood...hopefully they give me something useful. I did open the unit, and it has a number of screw-adjustable resistors, but I did not touch any of them. Question: Any ideas from anyone with a ...

...if the cd inside is scrachy or is not running propey due to any reason system is programed to switch to next source try to clean the inside of the system through air pressure from some external ...

kenwood.com/files/B60-5027-00.pdf The problem you have is, you cannot insert an Analog external signal modifier into a Digital audio chain (Optical or S/PDIF). Your receiver does not have an Equalizer

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Car Audio & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...