...water level? Kenmore front load washer, model # 417.43142300. Date of manufacture 11/03. Clothes (whites) going gray. I run whites seperate from darks and colors - in hot,warm or cold water. I am ...
Kenmore top mount freezer has made "block ice" since we brought it home. At times the ice cream also softens up. There is also a build up of frost in the freezer. The "mother board" has been replace 2
Question about ATF6000ES Front Load Washer
...water. He said to use fabric softener to fix the problem. I started using fabric softener and I still am getting the marks on the clothes. All of my daughter's new summer clothes are ruined.What do I ...
...Kenmore Elite Washer that I purchased in 2004. It is installed using the laundry tub drain system. I removed the drain hose and discoverd a ton of built-up slim and gook. It was disgusting! I soaked ...
...water cycle don"t work We have a Kenmore 800 washer, model 110-28832700. It washes and when it gets to the spin cycle....nothing...just stops....We have to turn it off...let it just sit for a while, ...
kenmore elite washer HE 5t Steam ...error F20 flashes after washing process begins. it washes for a while then all of a sudden it starts flashing this error. the washing machine is still making sounds
...softener is still full? help please "F20" is a No Water Detect error. It is an indication that you either have no water coming into the washer, or very little water at all. If the pressure switch has ...
...tech doing it It may be as simple as checking your lint filter. If you use fabric softeners sheets, they tend to clog the lint filter holes. Washing it with soap and water will restore it back to ...
Question about HE2 Plus Front Load Washer
...Water is flushed through the soap tray at various times during the washing process. The first time to pick up pre wash soap. The second is to pick up the wash soap. The third time the bleach and ...
Question about HE2 Plus Front Load Washer
...Kenmore 417 400 42990-16 yrs front load washer was diagnosed with a broken spider assembly. AHS now says that I overloaded the machine but I never have - there is only 2 of us. Suggestions? We have a ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions