Questions & Answers for: kenmore washer valve screen

Question about 22422 Top Load Washer

1 Answer

kenmore 110 washer actually is a kenmore 110 model toploader, cold water flow is minimal to none, hot water ok.. Filter, valve, blockage if screens on both ends of cold fill hose are clean replaced ...

Ad

Question about 24032\24036 Top Load Washer

1 Answer

kenmore 80 series drips/leaks into the bin after load of laundry is done and does not drain. The washer slowly fills up. It leaks form the back top left edge. suspect sand/rust has gotten past screens

Ad

kenmore series 70 top load washer - cold water fill very slowly. the washer line is on the same line as sink faucet. can turn faucet on & get washer to fill normally. The screens in the line are ...

Question about 44102 Front Load Washer

1 Answer

kenmore 44082 washer won't take in fabric softener My 4 year old kenmore 44082 washer won't take in fabric softner. We followed the instructions for cleaning the fabric softner drawer but the washer ...

Kenmore top loader washers the hot water cycle just trickles into the washer, all other cycles work fine. Even the cold water rinse that is part of the hot water setting runs fine. Took hot water hose

Question about 24032\24036 Top Load Washer

1 Answer

Kenmore 24032 24036 Top Load Washer Problem . Cold water is not runing through my washing maching. Hi, When the washer is set for cold water only, can you hear the inlet valve humming? Remove the fill

Question about 24032\24036 Top Load Washer

1 Answer

Kenmore washer 90 series will not fill up with water Kenmore washer 90 series will not fill up with hot or cold water. How do I take the top of the washer off to look at the fill valve? You can shut ...

Question about 98702 Stacked Washer/Dryer

1 Answer

...kenmore washer dryer will only run hot water. That would be a problem with your water inlet valve. Before checking that make sure the screens in the hose is clear and when you disconnect it from the ...

Question about 3.2 cu. ft. Plus Top Load Washer

1 Answer

...washer takes forever Kenmore 90 Plus Series washer washer takes forever to fill during rinse cycle (cold water) is the cold water all the way on? if so, the first thing to do would be to check the ...

Question about 3.2 cu. ft. Plus Top Load Washer

2 Answers

...kenmore washing machine is having problems with water pressure shut off the house water feed to the washer,mark the hoses so you know where they go when you reconnect them,remove the hoses from the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...