Question about 15864/15862 Top Load Washer
Kenmore top loading washer model 110-9259220 90 series has a very slow leak How do I remove the inner metal tub, there appears to be a special tool to loosen the round 4 noched nut holding the metal ...
...Kenmore 60 series washer. I have removed the agitator and tried to life the inner tub out to no avail. How can i remove the inner tub? there is a special nut called a spanner nut. it is about 1 1/2 ...
Question about 22422 Top Load Washer
kenmore 80 series leaking....plastic tub cracked on the bottom I have removed the agitator and the large "nut" underneath the agitator, but now I am stuck....not sure how to remove the tub / tubs to ...
kenmore 80 series top load problem. Washer is spinning, but not draining water back out. This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin ...
kenmore 700 series top load washer:sleeve that anchors metal tub is sliding down preventing spin out? you will need to replace the drive block. you will need to remove the agitator then remove the ...
...Kenmore elite top washer 22032100 (118) How do you get the tub out? Thanks Bob Assuming that you have a basic Whirlpool / Kenmore top load direct drive washer (prefix 110) see the following Sears ...
Question about 22422 Top Load Washer
...just sprayed wd 40 . ill let it stand over nite .Is there any thing else i can do to get it off. its suppose to come right off according to the instructions. I have a kenmore washer model# ...
Question about 24052 Top Load Washer
Kenmore model 24054 washer that leaves dark streaks on clothes. I have a Kenmore model 24054 washer that leaves dark streaks on clothes. I assume it is coming from detergent/grime under the agitator. ...
...washer is to pull the agitators and drum in order to get to the tub. Following is the Whirlpool / Kenmore Service Manual for top load, direct drive washers. ...
Question about Elite Oasis 27052 Top Load Washer
...washer is definitely not overloaded. Remove the cap atop the agitator, then take the nut off there get the agitator and tub out; see if something is in between tubs. Items jammed between tubs can ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions