Questions & Answers for: kenmore washer stuck wash cycle

...kenmore 80 series, top loader, 3spd motor, ultra rinse, heavy duty, super capacity plus, quiet pak "The washer does not drain the water out after the wash cycle. It started a month ago not spinning ...

Kenmore front load washer won't drain I have a Kenmore front load washer that won't drain... I washed a comforter today and it appears the washer got 'stuck' after the wash cycle. There's probably a ...

washer is stuck on the spin cycle at 8 minutes! help!!! After having some overloading problems, and correcting that load's issues, our washer is stuck on the spin cycle at 8 minutes. any ideas? i lost

...Kenmore Elite Washer that does not complete the wash I have a Kenmore Elite Model 110.22082 that either stops in the middle of the wash cycle and there is an error message SL or it gets stuck in the ...

Kenmore HE3 washer emits steady, constant beeeeeeeeeeeeeep The signal that normally beeps for end of cycle emits steady, constant and loud tone during entire wash, rinse and spin cycles. No error ...

Kenmore 90 series washer will get stuck in between cycles My Kenmore 90 series washer works fine washing my clothes, but after the wash cycle it won't go to rinse. I have to agitate the machine a ...

...Pump failure. Unit probably has something stuck in pump....the washer eats the socks not the dryer. suggest shope vac to get water out, and then remove hose from pump and check to see if its

Kenmore 80 serise Model 110 2892 990: washed fine, then started making a terrible noise at the beginning of the drain cycle. Washer drains and fills fine, but will not agitate or spin. The sound is ...

...Kenmore washer that I need help with I have a washer machine that gets stuck on the Rinse cycle and wont continue washing until it's manually moved further along. This happens with all the various ...

...Kenmore HE Washer is stuck on Sensing Cycle and not proceed to the Wash cycle, most likely one of these 3 parts malfunction: Failed Water Inlet Valve or Inlet Valve Tap is in OFF position. Shift ...