Questions & Answers for: kenmore washer past sensing

...Kenmore Elite Front Loader Washer F09 Error 110.42832 200 I have an Elite front loader washer Model Number 110.42832 200 that I purchased in July 2002 from Sears. In July 2007 (2 months ago), the ...

...washer is turned on, it does not do its "sensing" spin and the pump turns on - it never gets past this. Pump sounds a little strange but that could just be because it is running without any watter. ...

...kenmore HE4 front load washer. went through all cycles but won't drain, get code F02. i found diagnostic papers and tried to run diagnostics, but it will not go past the washing part. stopped it and ...

Kenmore 80 Series will start to fill, then stops, will spin My washer will start to fill, then stops adding water and makes a low sound like it is stalled. I have tried pushing the dial in and ...

...washer still doesn't work, check the motor coupler. Kenmore / Whirlpool top load, direct drive washers use a "Motor Coupler" between the motor and transmission. It's used as a fail safe device and ...

kenmore washer model 111 24622300 fills with water then machine is dead. Will not go past filling cycle. This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain ...

...Kenmore washers use a Lid Switch as a safety device. Unless the switch senses that the lid on the washer is closed, the washer will neither agitate nor spin. Older models only used the switch during ...

Kenmore washer is not working properly.The last load was wet and full of lint.I am running a cleaning cycle now but for 2 hrs. it sounds like it is filling with water and agitating. The machine lights

kenmore 400 washer. The washer will lock and start the sensing process but never goes past that point. I have tried unplugging the washer to try resetting it. What could the problem be? Drain pump may