Questions & Answers for: kenmore washer leaks hot setting

kenmore model 11092284800 washer regardless of water temp setting no hot water will go into the tub. I have the water heater next to the unit & have hot water throughout my apartment.I do hear water ...

...washer my kenmore portable washer won't spin or agiate and water leaks from the bottom 1. Find out where the leak is coming from. Does it leak constantly or during one part of the cycle? A constant ...

kenmore portable washer not working right My kenmore portable washer was working fine and then one day it quit spinning and it does not aginate at all the water drains out but the bottom of the washer

...Kenmore washer spin dryer problem, and location issue. Have 2 old kenmore "washer spin dryers" that both leak. Wonder if can be repaired cost effectively. Also if new kenmore "washer spin dryers" can ...

...Washer: My 2002 Kenmore elite front load washer (stackable... My 2002 Kenmore elite front load washer (stackable) leaks from the bottom. Not sure what cycle. Repair person said berrings are bad? ...

...kenmore elite washer model 110 front loade... Hi our kenmore elite washer model 110 front loader is leaking from the back bottom??? 1. Find out where the leak is coming from. Does it leak constantly ...

...washer continues to leak hot water in the tub when its not running and the temp is set on cold any ideas ? Water is leaking past the hot water fill valve solenoid .The only repair is to replace the ...

...hot water supply closed because it's leaking. So...if my washer is set to use anything but cold water it will stop mid-cycle and display the same thing because when it tries to "pull" hot/warm water ...

...Kenmore washer. Recently I can only get it to fill with cold water even if I set it on warm or hot. The hot faucet is turned on and all hoses are connected with no leaks. What might be the problem? ...

washer model #110,22802100 won't go to spin cycle in any setting. all else works fine. I would take a look at that lid switch if I were you. Jump them 2 hot wires on that lid switch connection to see ...