Question about 23913 Progressive PowerMate Bagged Canister Vacuum
...vacuum on the performance indicator light goes on and will not suction? check to make sure the bag isn't being sucked into the air filter. open the access door where the bag is and you'll see the air ...
Question about 25614 / 25615 Progressive Bagged Canister Vacuum
performance indicator light is on and suction is not strong We have a canister vac and lately the performance indicator light is on and will not shut off. Since the light came on the suction power has
Question about Progressive Bagless Upright with Inteli-Clean SystemVacuum
Performance Indicator light on I can't find the manual. What does this mean? This usually means a clog in the system or a clogged bag or filter.
Question about Progressive Bagless Upright with Inteli-Clean SystemVacuum
...However, this circumvents the intended design so you do so only at your own risk. i'm having same noise How to change the round filterin the Kenmore Progressive upright Bagless Inteliclean
Question about Progressive Bagless Upright with Inteli-Clean SystemVacuum
The performance indicator light keeps going on. I've changed the bad and filter...any other suggestions? it is probably clogged somewhere, if i was to guess check the hose.
Question about Progressive Bagless Upright with Inteli-Clean SystemVacuum
Performance Indicator light comes on something is clogged.. a coat hanger will get it out from hose.. make a small hook on the end, stick it in and fish it out.. probably where it is .. drop something
Question about 25614 / 25615 Progressive Bagged Canister Vacuum
suction power greatly diminished . Bag replaced...hose is clear...Performance indicator light is on and red..much less suction that it should have' clean the filter.
Question about 23313 Whispertone Bagged Canister Vacuum
my kenmore whispertone has something called a performance indicator, what does it indicate? [email protected] It indicates that the bag is full, or the filter is getting clogged.
Question about 23313 Whispertone Bagged Canister Vacuum
performance indicator light is on You probably dnot have a proper seal. When you change the bag make sure you close the vauum body tight. Any leaking of air will cause the vac. to lose suction. Vacuum
Question about Whispertone 23312 Bagged Canister Vacuum
kenmore canister vacuum loses suction. clogging is not the problem. vacuum starts out ok, then after running awhile, although the motor is still running, there is no suction. the bag is not full &
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions