Vacuum won't come on My Kenmore 25513 won't come on. The carpet attachment/beater bar works, but the vacuum will not come on. The switch in the hose maybe bad, motor problem, or some of these ...
Question about 31913 Progressive Direct Drive Bagged Upright Vacuum
...beater bar, light and self propel action all work intermittently on our 31913 direct drive Kenmore. The problem is not with the reset button nor a loose hose/switch issue. I believe this problem has ...
Question about 22313 Bagged Canister Vacuum
...kenmore canister vac, plugged in, cansiter working, good suction from hose, when pushing or pulling the powermate, the motor cuts in and out. If your talking the motor on the beater bar, then chances ...
beater bar stopped working I caught the edge of a rug in the beater bar and it stopped working. I have pushed the reset button but it did not fix this problem. The suction still works- it's just that ...
beater bar has stopped turning I caught the edge of a rug in the beater bar and it has stopped working. I have pushed the reset button but that has not helped. the suction still works, the beater bar ...
kenmore progressive vacuum won't keep going. It keeps stopping while vacuuming. This sounds like the belt that drives the beater bar on the vacuum. The beater bar bearings and brushes could be plugged
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...and it is fine, also have checked for blockages. The switch to turn the beater bar on or off will not work when the beater bar motor is off. the suction is fine though. Buy a Kenmore for less ...
...Kenmore upright,model 116 31912100.it runs fine,good suction I cleaned everything filters,bags,beater bar etc....My problem is the beater bar/agitator is not working.I took apart and I do not see a ...
...Are you running the height setting too low? Maybe lint and stuff built up on the beater bar? Beater bar usually slides out from bottom so you can replace the belt. Not sure what you are asking
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...kenmore vacuum cleaner to the vacuuming position? The vacuum works. The handle won't lower from the beater bars part. I can't find a lever to lower the handle of my kenmore vacuum cleaner. Left lower ...
Usually answered in minutes!
1,133 Questions
1,137 Questions
870 Questions
836 Questions