Questions & Answers for: kenmore 3/4 thread serger

...kenmore 16622 mchanical serger. The thread on the green, keeps coming undone. The thread will literally come out of the last hole of the threaded part. After threading the machine entirely, I am not ...

Kenmore Sewing Machine 385 My needle keeps coming unthreaded while sewing. Help!!!! check the Bed Drop Lever Im having the same problem but the lever is not enguaging the bed I BOUGHT A SERGER SEWING ...

kenmore serger stitching undoing i threaded the serger and started to sew the thread keeps breaking and the stitches are so loose and come undone i have tried to adjust the tension and nothing helps ...

kenmore Open the tensions (set at zero) and have the presser foot up when threading. Make sure the antenna if fully extended. Turn the handwheel so the upper looper is at it's highest position. Thread

kenmore serger 3/4D, bottom looper thread keeps breaking, can't see where to put the thread before the last lower looper thread hole Try looking for a free download on wiki, manage my life, or just ...

...Kenmore serger's needle and it stopped making the overlock stitch. I rethreaded the machine twice and make sure the position of the needles is correct but it didn't help Hi If you have the operators ...

coming out on the 3/4 thread kenmore serger. How do I fix this problem? try rethreading the needle & keeping thread tails of at least 4 to 6 inches that you can keep pulled behind the needles 

kenmore serger thread keeps breaking The thread on my serger keeps breaking. I have completely rethreaded too many times to count. Will work for about 10 seconds the thread breaks. Serger thread ...

kenmore 385 #3 thread breaks Serger is properly threaded. Tension is great. Barely used machine! Needle is correct for fabric. The blue #3 thread continually breaks, doesn't catch in fabric at all :( ...

...#38581595. Please can you email me the instructions ? https://www.youtube.com/watch?v=Szs-LXrD2h0 Video shows how to thread Kenomore "Serger" How to thread Kenmore Serger Overlock 3 4D model 385 ...