Questions & Answers for: kenmore stove outlet working

...but the clock just won't stay on. I will appreciate any suggestions. Thank you for any assistance. the clock to my kenmore stove wont stay on. only works for about three seconds and then it turns

...Kenmore gas range, model number 362.7556191. I was cleaning the top of the stove this morning and when I turned on the knobs for the burners, they wouldn't ignite. All I get is a clicking noise. The ...

...Kenmore Elite Microwave model #80822. I was cooking on my stove this evening with the vent on the microwave on. When I tried to use the microwave, it would not work. None of the buttons worked. I ...

...stove out and making sure it is plugged in. If it is, unplug it and plug something else into the plug like a blow dryer to make sure you have power to that outlet. If there is no power, you have ...

kenmore stovetop the other electrical outlets trip, i unplug it and reset the outlets and the outlet works but i can't use the stovetop unless i light the gas with a match now. what is my problem? you

...stove top burners are working.............what could have happened and is it worth it to get that fixed? I have had the Kenmore model 95423 range for 5 years. thank you for your time. Electric gas ...

...stove. No problem with the outlet either. Hi, Here is a tip that I wrote to give details about why your cooktop will notspark to light the burners.. Cooktop Range Stove spark ignition does not work ...

kenmore 18500 reset will not reset. I change outlet, breaker is good the reset cord is bad replace it if 220 can replace with stove cord ,tie in to old cord use big wire nuts,and electrical tape I did

stove? If so , one of you 50amp breakers may have tripped causing half the machine to only work. See if it trips again,then call us back Was this helpful We had an electrical outlet short out. There's

...stove (kenmore)to the power cord of my new stove. I need to know where the red, black, green and white wires go. First try using same order as in old cord did not work. Can you please provide wiring ...