...stacked and I had to remove a shelf and bracket to take the top off. I also had to climb up on top of a safe to get to the top. I am in a condo and quarters are tight. I guess it must be pretty ...
...washer/dryer stops before latch will release anything much longer proably lid lock ..remove 2 screws bottom front panel front drops and comes off switch is on right remove screw each side of top lift ...
...washer/dryer unit. the dryer works, but the washer does nothing. could it be a reset button? The washer went off balance Check the Vibration damper rods to be sure that... 1. They are there and mount ...
Question about 88752 Top Load Stacked Washer / Dryer
Dryer works but washer won't turn on. Washer worked until a few days ago. No warning or events. Just doesn't respond to switch. I can't find a fuse box on the unit itself. Hi, Have you tried plugging ...
Kenmore washer reads..controls locked This advise is for Kenmore Elite and Whirlpool Duet front loader washers and dryers with a Control Lock problem. This may or may not be an indication of a serious
Question about GHW9400SU Front Load Stacked Washer / Dryer
Kenmore Elite Washer - Press and hold the DRAIN/SPIN button for 3 seconds. Kenmore Elite Dryer - Press and hold the AUTO DRY LEVEL button for 3 seconds. These instructions may not be all inclusive for
Question about 98702 Stacked Washer/Dryer
...reset button I have the problem it stops befor and won't drain or go in to spin is there a reset button the pump is plugged up with foreign material and shutting down the unit,remove rear ...
...washer or dryer will turn on - I checked the breaker and that's not the problem. Is there some type of reset button that needs pressed? Sometimes there is a GFI or ground fault interrupter switch in ...
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions