button holer It is the first time I've used it. The attachment sews the tack bar and goes back the first side. It then does a little tack bar (half the size of the first) and stays there. It doesn't ...
...machine to sew backwards. Be sure your length is to the right of 0 and not in a strtch stitch model or buttonhole mode. Bonnie My kenmore 12 stitch was stuck in reverse. My friend used to work with a ...
Question about 15218 Mechanical Sewing Machine
i need repair mamual for kenmore 385 1674180 how to time the machine it won't stitch email me for an attachment of instructions [email protected]
Question about 15218 Mechanical Sewing Machine
My Kenmore machine is out of time how do we fix it. EMAIL ME AND I WILL ATTACH INSTRUCTIONS BUT REMIND ME OF YOUR MAKE [email protected]
Question about 19365 Computerized Sewing Machine
...up, I hit a straight pin, changed needle, and cleaned it and checked, the timing seems to off how do I set the timing If you email me I will attach timing instructions ...
Sewing machine not stitching My sewing machine was sewing fine, then all of a sudden the zigzag stitch started skipping stitches, when I moved to a straight stitch it didn't stitch at all. The fabric ...
...Kenmore 18630 sewing machine needle thread is not being caught or engaged by the shuttle. A sewing machine repair shop said that the timing on the machine needed to be set. The cost is more than the ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
Kenmore 385-16231 sewing machine. we are having problems with it breaking needles while sewing, we have never oiled this machine could this cause the needle breaking problem? some sewing machines are ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
Kenmore sewing machine runs but does not sew motor justs spins. needle does not move up and down. belt is ok Your machine has seized due to lack of cleaning and oiling. Might be best to take it for a ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...Kenmore 158/900 is not looping the bottom stitch from the bobbin thread and the thread sometimes breaks Can be several causes. In typical probable order for rotary hook machines; 1.Top thread tension ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions