Questions & Answers for: kenmore oven door stuck closed

...oven has a very heavy door so when you close it, it usually pulls to w/ a bang. The oven light would sometimes stick on but if we "jiggled" the switch a little it would go off. Well, now our oven ...

kenmore self cleaning oven 362.75471691 i used self cleaning mode it worked fine door unlocked but now when i try to use the oven the red door latch light flashes and oven nor broiler will work it ...

Kenmore Oven Door Lock Stuck Out We have a Kenmore oven and the lock is stuck out and won't go back in; we can't run the oven because we can't close the door. There is no error code and we don't know ...

kenmore oven door stuck closed I have a kenmore gas stove-model #790.75715890 / serial #VF81210635. I was attempting to have the oven self clean. Then I hit clear now the oven door is stuck closed. if

...door switch is stuck closed.there are 2 door switches and they could be assesed by removing the control panel.disconnect wires from top and bottom switches and chkf for continuity.they should be ...

...oven door is open and will not close. hold the door switch in and press the clear/off button for approx.three to five seconds this should free up or unlock the door.also try and unplug or turn the ...

...Kenmore Electric Range Series 94931. We bought a house, and the stove came with it. We have a problem with the oven latch. Not sure if it was already broken before my wife first used the oven (about ...

to replace the board. IF it's just making noise like it's working, but it's not heating, then the problem is that one of the door switches is not working right (it's either stuck open or stuck closed)

...oven door closec on my Kenmore sself cleaning stove after i mistakenly hit clean? Now the lock is on and my door wont close and tge light stays on in the oven? What had happen is that you activated ...

Kenmore 790.80353310 installed Feb/2017 microwave exhaust fan and oven light stay on with door closed. removed cover. all switches and stats ok. do control boards quit this early? It may be just a ...