Kenmore He5t washer: Code F27. What do I need to Kenmore He5t washer: Code F27. What do I need to do? F27 is an Overflow Condition error. If the Overflow contact on the pressure switch is closed for ...
...Kenmore Elite is reading F23, there is water in the machine.. I have unplug then it act like it will wash, the door locks goes to 13 minutes then give erro message Hello, Welcome to FixYa. The F23 ...
...kenmore elite he h4 washer and it flashed f 02 then stopped working it wont spin This is what done. 1. Unplug the washer 2. Take of the toe panel in the front by removing the three screws. 3. Get a ...
...water inlet filters. Turn the taps off and remove both hoses at the washer end. Inside each inlet port there is normally a little filter which should just slide out. Clean if necessary and replace ...
Question about Elite HE5t Washer
Kenmore Elite HE 5t is showing the F20 code 15-20 seconds into the washing cycle. F20 standing for Water inlet problem. We have cleaned and checked all inlet ports and they are good so what else Model
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions