Kenmore Elite H3t washer My washer sometimes shows a F2 code during the spin cycle and does not spin out the clothes. This stops the cycle and we hear a beeping sound. I sometimes can select the ...
Question about Elite 45986 Front Load Washer
Kenmore Elite HE3 washer I keep getting an error code that flashes F then 2. I have been pausing the cycle and then pushing the start button and the load will finish with 22 minutes left in the cycle.
Question about Elite 45986 Front Load Washer
Kenmore Elite He3t front load washer - error code reads H & F After starting a normal wash cycle the machine will begin to add water and then the error code flashes an H and then a F while it is in ...
...kenmore elite quiet pak he3t F2 and F02 error are one and the same. My daughter was doing a load of towels in my Kenmore Elite HE3t front loading machine, when I went back to put them in the ...
Kenmore washer he3t F2 I have the error code F2 showed up. I cleaned all hoses from and to the pump. The filter from the pump is also clean.But after starting the program the F2 shows up again.What ...
Question about Elite 45986 Front Load Washer
...Kenmore elite he3t front loading washer and the washer will not spin or drain and shows an f2 code. any suggestions "F02" is a Long Drain error. If the drain time exceeds 8 minutes this error code ...
kenmore elite he3t washer "F02" is a Long Drain error. This is usually an indication of an obstruction somewhere in the drainage system, or a failed drain pump. In most cases, the drain pump reservoir
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions