Questions & Answers for: keep air conditioner low

air conditioner freezing the low presure line at the outside unit keeps getting ice on it. Then the inside unit starts to freeze up also. Any ideas? Check your filter in the furnace, Then check the ...

...air conditioner.keeps turning itself off and the opertation light keeps flashing a/c units have ways of protecting their major components. if you have a freon leak it could be shutting down on low ...

...Air Conditioner NMPEB08F2A Keeps shut off! Emptied water and cleaned filter... now what? The tempertures outside have been in the upper 90's and low 100's.... need air conditioner! I thought Maytag ...

...air conditioner cycles on and off This winter, my furnace suffered a power surge. I had to replace the board in the furnace. I am not sure if this relates to my current problem, but my issue is that ...

...keep from frezzing up. The freezing is caused by too little airflow over the evaporator coil or a low refrigerant charge. Make sure your air filters and the evaporator coil and condenser coil are ...

keep the fan speed on low at all times on the Soleus Air MAC-10K? Every time we adjust it to low after about 10 minutes it automatically changes fan speed to high and it does not go back to low unless

...startup capacitor is good. You need to check the freon pressure. Your system may have a low pressure switch. If the system is low in freon the pressure switch will keep the compressor from coming

...air conditioner is freezing up it keeps freezing up on the front panel and I have to turn it off for it to defrost. Thanks for responding to this question! I didn't know that a dirty filter could ...

My air conditioner keeps shutting off The timer does not seem to be working, when I set it, it works for a few minutes, then shuts off It could be low in gas, needs servicing by a trained technician

...keep you cool because the temperature difference between outside air and room air is low the air conditioner cycles less frequently and costs less to run if the room setting is at minimum and the ...