Questions & Answers for: kawasaki mule heating

kawasaki mule heat light staying on After I replaced the water hose and filled with water the heat light keeps coming on I don't think the water is circulating Replace the impeller in your water pump.

...kawasaki 3010 desiel mule that has worked fine for years with regular maint. then yesterday we started it as usual with the glow plug lights indicator and it ran for a few minutes until we went to ...

...Mule m/n 3000 s/n KAF620G. It is over heating, and the cooling fan is not working Have you checked to see if you jump the wiring on the fan that it works? If so jump the wires on the temp sensor. If ...

rear wheels lock up at high speeds 2002 3010 mule rear wheels are locking up at top speeds, when you shut the engine off and restart it drives normally at low speeds until you get going faster then ...

after running for a few minutes temp light will start flashing when u give it gas efi light comes on and will only idle There are a few things that can cause this problem, though with it giving temp ...

Kawasaki Mule XC SE 2 weeks ago. It seems to run sluggish once warmed up, and actually wont stay running once its hot from plowing. Let it sit for 30 minutes, it will run fine until it gets warm again

What causes a short in the wiring harness in a Kawasaki mule, model 2410, that blows th inline fuse. Heat, vibration and movement or flexing . Check those areas first and any connection or connectors

...Kawasaki mule 600. Problem is not always cranking when turning on ignition. You can keep trying and it will eventually crank, sometimes turning over slow. Replaced starter/solenoid, no help. Cranked ...