Kracher k3 97, low pressure The motor runs and cuts out as it sould befor the trigger is pulled, but when the trigger is pulled there is flow but no pressure the motor cuts in ok, i have checked the ...
I have a K3 78M electric unit . The motor pulsates I have a K3 78M electric unit . The motor pulsates when its in the on posistion but not being used. It works fine when you squeeze the trigger but ...
Question about PSI Electric Pressure Washer
Karcher K3 jet wash as long as i hold trigger down I can use my Karcher K3 jet wash as long as i keep trigger depressed ,as soon as i release it the hose pops off the jet wash end..is there a pressure
Question about K2.26 Electric Power Washer
...cord and GFCI. Where I need to replace the power cord and GFCI. Where can I find a replacement for the Karcher K2.40? Cable With Plug, Karcher 66488610 Part # 6648861 approx. $65 ...
...Karcher K3 that I was determined to repair and ended up changing parts in order of known failure points until the problem was cured. Firstly I changed the output elbow (Plastic and known to crack due ...
Question about K2.26 Electric Power Washer
...Karcher Factory-Reconditioned 2,600 PSI 2.3 GPM Gas Pressure Washer G 2600 VHR. Same machine I suppose, but use the black 65 l degree low pressure nozzle. It's in the manual , I missed it and had a ...
...detergent tub can either be filled or not. Here is a video which demonstrates a model. Take a look. Karcher K3 550 Pressure Washer demo . She has a charming presentation. Straight forward. Fare.
karcher k3-91m electrical box when all connected and plug-in, the karcher motor starts immediately and keeps running eventhough the switch is in the off position. Turning the switch on & off does not ...
Question about K2.26 Electric Power Washer
a Karcher K3 that surges when I turn it on. I purged the unit and seems to work well. But when I reattach the hose/nozzle, it starts surging again... Insufficient water pressure would be my best guess
Karcher K3. 91M pressure washer Low pressure Ran water through hose to clear air from line. All seems to work well except pressure is low from the pressure washer itself. could be unloader valve or ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions