Karcher G 3050 OH pressure washer with honda engine: The pull cord is locked so I can't start the machine. Help! the model G3050 OH use gas or mix?
HELLO SIR I HVE MY KARCHER WASHER WASHING PUMP HAVING PRESSURE PROBLEM THERE IS NO PRESSURE WHEN I START THE ENGINE Check the pump. If it's turning you should have pressure unless the pump is leaking
Question about G 3050 OHR Gas Pressure Washer
Karcher 3050. where is it and how do I fix it? Hello: Here is a schematic. On page 2.1, part #1 is the unloader valve. You need to remove it and lube it with a very good waterproof grease. Also insure
Question about G2500PHR Factory Refurbished 2,500 PSI 2.4 GPM Gas Pressure Washer
Karcher G 3050 OH the pressure is not constant, I think that is the pumps pressure regulator but I'm not sure Check the suction line for leaks. It needs constant water supply to build a constant water
Question about 2500 PSI Pressure Washer
G-3050 - area to draw soap - how to put washer/ball and spring I own a gas powered pressure washer - G 3050 - It was not drawing soap and I took it apart and the spring and ball popped out. How does ...
...Karcher 3050 power washer will work, but only sporadically. Works fine, then wont work at all for 3-5 minutes. Everything is hooked up correctly... I believe. Ideas, thanks. dave can be multiple ...
no water pressure from unit check inside the pump fro sticking valves
Question about G 3050 OH 3000-PSI Honda Gc190 Gas-Powered Pressure Washer
How do I remove the connectors from the output hose? Does it have brass quick connects or is it screwed directly into the pump? Feel free to email me.
...High pressure pump You can get a repair or rebuild kit for this pump at any store that sells Karcher. You need to have a torque wrench and a set of picks to remove the packing. Take the head ...
...Here is a listing of many PDFs for that model Download free pdf for Karcher 3050 OH Pressure Washers Other manual Hope this
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions