Questions & Answers for: jvc radio saying check wiring

radio unit . When finished I reconected but nothing seemed to be working . Its not a power loss cause when I press the "display" button it shows the time it seems to be "on" ... The other task it does

Jvc kd-66060 cd player problems Hello my names sharleen, my garage had my car for 4 weeks and now i have had it back the radio wont work. you can eject the cd and the display button works but thats it

...JVC car radio head unit, it is receiving power in so much as it lights up when you push the eject or display button but wont do anything else, the wiring into the block was done according to the ...

want to do a hard-reset on the unit. To check for speaker short, pull the radio out and unplug the harness... Probe all the white, green, purple and gray wires if any through a ground you have a short

...JVC KD-R616 and stumped on two issues, one is the orange wire with white stripe from the deck the install sheet says wire to car light control switch, what is its purpose? is it needed ? and where ...

JVC KD-HDR50 was working perfectly up to a couple days ago. While driving it spontaneously powered down and back up again. None of my setting were changed. Later on, it powers down again and this time

...jvc kd-r311 radio in my car which has been working for about a year now, but a few days ago it came up saying "protect" on the front and now doesn't work, I've tried pushing the ...

JVC KD-618 that automatically turns off after 3 or 4 seconds, i tried disconnecting all other cables but yellow black and red, after I plug it in it turns on all the lights in the display but turns of

JVC model KD-R640 it says Unit Miswiring Check Wiring Then reset how to fix that with this model of radio Umm... check the wiring then reset?