Questions & Answers for: jumper pin settings samsung

...jumper. My next question is, can I just go in and change the CCA settings. I got some settings that came with my new wheel. I just want to make sure I don't screw anything up. I've heard the CCA ...

jumper pin settings for my SP1203N Samsung drive: To make it a master drive, where should the jumper pin(s) go? Hold the samsung SP1203N hard drive in your left hand with the lable facing upwards ...

Jumper pin Settings samsung hard drive SP1604N hi frnd... just have a look at this pic it will help u.. http://common.packardbell.com/PrsPicDwn/08-192-1.gif this is the jumper setting for master... To

...jumper setting for Master settings It should have a pin layout diagram on the back of the drive. The diagram shows the pins as if you're looking straight at them, so set the jumper as it appears in ...

...pin jumper setting info. You dont need jumper settings for sata hard drive, the sata ports on *********** board have the configuration, just connect the new hdd to the 2nd sata port. Every hard drive ...

jumper settings when used as a slave in a HP pavilion 6835 There are 3 pairs of pins: * MA(ster) * SL(ave) * C(able)S(elect) Move the jumper to connect the two 'SL' pins, if you want to use the drive ...

...jumper settings. 5. Find the jumpers on the circuit board of the drive. Jumpers are plastic plugs with metal sleeves that form a circuit between a pair of pins. Jumper locations are labeled on the ...

...Samsung SP2514N (250GB/7200rpm/8M/PATA) drive that I am trying to use as a USB drive on my laptop with Vista on it. The device manager shows that there is a drive there, but that is all. It does not ...

...pin? Can't find any manuals online Your hard drive may have two partitions, the first partition configured as 150Gb and the remainding 100Gb partition may not be set up and formatted. The jumper ...

...Pin Setting" Note that after changing the jumper, it's suggested to partition and format your hard disk drive. In case of a problem or clarification or further details needed, don't hesitate ...