Questions & Answers for: jig saw blade wont move

...jig saw I can't seem to get the blade to stay in my jig saw. I found a screw that was loose, down through the handle, but when i tighten it the blade starts to tighten but then also starts to turn ...

...jig saw SDS system There is a lever on the handle, you have to pull it up and rotate it counter clockwise about 3 times (shouldn't take any more than that. The blade will be loose now,put in the new ...

...amp-jig-saw "task-force" brand 4 amp jig-saw how is the blade changed? I have misplaced the manual. how do i change blade on task force jig saw. i am un able to pull it out after pressing button for ...

...saw upside down to prevent the blade from moving while tightening. Before inserting a new blade, check the receiver for obstruction or debris that may prevent the blade from properly registering with ...

...to allow the blade to be removed wont move and thus I cannot get the blade out. Thanks try using a little spraying a little oil on it also allot of the time there is a small screw to loosen the

jig saw sounds like its running just the blade isnt moving at all..... how do i fix it? Unplug and Take the case apart. You will probably see that the gear moving the blade collet is stripped. Or, the

jig saw b4300 blade replacement jig saw b4300 blade replacement This tool has no mechanism for the fixating ot the saw but only a short ***** part 53 its a fault in the manual , it simply replace the ...

Jig saw blades wont stay in. Without a blade in the locking screw (to hold the blade in place) tightens nicely but put a jigsaw blade in and then it will not tighten to hold the blade in place so it ...

how do I remove a makita shank blade as bolt wont move with allen key Maybe application of a suitable rust penetrator will persuade it to move.

...jig saw blade falls out Dewalt Jig Saw DeWalt Jig Saw MANUAL ManualsOnline com Blade catch wears out too fast I loved this tool when it was working but after not that much use the teeth that hold the ...