...Jeep liberty. The engine began to studder and the malfunciton indicator light came on and flashed. At a stop light the engine died and did start again but stuttered the rest of the way home. I have ...
...Jeep Liberty out of warranty. Please correct 2003 3.7 Liberty check engine light for crank....what? sensor? You have scanned it? lost power on my jeep liberty 2003 engine power wont go faster then 70 ...
...jeep liberty 0., engine light on, stalls out at low rpm, slow accel, uneven revs. at constant speed, engine revs and jumps. The ignition timing is off. The ECM (Elctronic Control Module) is ...
...jeep liberty has an engine light (yellow)staying on checked it out and checked fuel cap it is tight... now I have a knock or tick in the top of the engine... any help? oil check oil. when light on ...
jeep liberty? 2003 JEEP LIBERTY 2.4L 4-cyl Engine Code [ Engine Oil Grade 1....API* SAE 5W-30 is preferred. CAPACITIES: Engine, with filter..........4.7 liters 2003 JEEP LIBERTY 3.7L 6-cyl Engine Code
Question about 2002 Liberty
...jeep liberty check engine light cranks but won't start in cold weather after a few minutes of cranking it, it will start and runs fine but now check engine light is on, just started now that it is ...
Question about 2003 Liberty
have codes indicating bank 2 running lean(po174,po153,po159) also have codes for misfires on all cylinders. Does the misfire trigger o2 codes or does bad o2 sensor cause misfires? misfire could cause ...
Question about 2003 Liberty
...Jeep > Liberty Jeep Liberty Check Engine Light/Misfire Due to Intake Valve Locks/Valves. ...Misfire cyc 4 and random cyc misfires, changed coil packs and plugs... sounds as if rod ... Light came on ...
Jeep Liberty- Reading Engine / Diagnostic Codes ... ? 1:13 https://www.youtube.com/watch?v=pGrPBBzp7wE Jan 6, 2013 - Uploaded by DeathScouter 2003 Jeep Liberty- Reading Engine / Diagnostic Codes .....
Question about 2005 Liberty Sport
...car tester, speedometer not working, check engine light on 2005 jeep liberty sport You say the check engine light is on, if so there will be a system fault code, read that code with a OBD2 code ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions