Questions & Answers for: jeep front differential

First I would check (or replace) all the gear lube in the transfer case and both differentials. If the sound is under the middle of the jeep, it's probably a front output bearing in the transfer case

...jeep grande cherokee the front end Defferentail is making this loud high noise I took it to tire plus and got an estimate to have some work done to my Front end and rear end differential, the cost ...

...jeep grand cherokee 1998 i have the same wurling noise only it gets much worse over 90 klms/h have done front wheel bearings but still no luck You need differential carrier and pinion bearings. Jeeps ...

...front differential. I have a 1998 Jeep Grand Cherokee. There is a hose hanging down behind the radiator that starts at the top, dirver side of the front differential. I can not find where the other ...

...Jeep wrangler. The front differential ratio does not match the rear differential ratio. I have another differential that does match the rear differrential. Both are DANA 30's Can I simply take the ...

...front or rear driveshaft? Does the Jeep drive? If the driveshaft was bad, it wouldn't move, so I'm assuming he's screwing you,since driveshafts don't smoke.LOL. If your front or rearend lube has come ...

...front end of my 2000 Jeep Grand Cherokee Laredo 4X4. it increases as you pick up speed. No noise if you coast or when putting the vehicle in neutral. I was told that it might be the bearings in the ...

1989 jeep cherokee laredo 4x4.have problem in front differential,can i take out front axels ?will that stop the use of front differential? Just remove the front driveshaft is what most people do.

...jeep grand cherokee front differential fluid is silvery even right after I change it. There is a howling noise upon acceleration. Seems to howl loudly when I am accelerating. Quiets down when I let ...

...jeep overland with Quadra Drive: Front differential (Dana 30): 1,18L (2.5 pts) Rear differential (Dana 44): 2,24L (4,75 pts) Both differentials use 75W140 and require 2.5 oz. of friction modifier to ...