Questions & Answers for: janome bobbin noisy

noisy bobbin Every time my bobbin gets down to about half full it makes a noisy racket while sewing. It's no longer the nice quiet, gentle machine I've always had. Generally runs fine when the bobbin ...

Machine suddenly became noisy on sewing I've been sewing with velvet. My machine is quite new and been used only a couple of times. It was it's usual silent self, sewing away happily this evening then

bobbin thread bunching After about an hour of sewing on my Janome Memory Craft 4000, the thread begins bunching on the underside of the fabric and gets increasingly worse. There is also a terrible ...

...bobbin case on new Janome 4020 I have just bought a Janome 4020. I tried the different stitches, when I used the overcast foodt it started making loops on the top-side of the material and it started ...

...wrong bobbin is being used or the bobbin case is damaged and vibrating. Take the thread off the machine and the bobbin out, if it sounds noisy with no bobbin then I suspect you need a new bobbin

...when they would lube the parts that need it. My Janome local dealer told me to put a drop oil under the bobbin case in my 6500P every couple of months onto the wick or if it sounds a little

...Janome KT 35 made a noisy sounds, and the threads didnt sew on the fabric. what should i do? the threads just move but didint stuck together Check under your needle plate for a build up of bits of ...

...bobbin keeps jumping up and down in my Janome Platinum 760 and the stitched aren't being formed. Also noisy. Have cleaned out bobbin case etc. hi have you replaced the bits back in the same way as if ...