Questions & Answers for: janome 6600p

Janome 6600p: E1 error Is there any way I can reset the control circuit. Turned my Janome upside down to remove panel to get loose object out of machine. When turned back right side up got the E1 ...

...cord for the Janome 6600P sewing machine www.janomestuff.com answer all your problem to your sewing machine I need a replacement power supply cord for my Janome Memory Craft 5700. Can anybody

...Janome 6600P I found it just for you! http://content.janome.com/documents/File/ManualFile/MC6600P.pdf Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be ...

I have a Janome 6600P and my comes down and hits the metal in the presser foot. What am I doing wrong? How do I adjust it?  and my ??????????? comes downyour ????? what ???????

Where do I find the fuse location on the Janome MC 6600P? The fuse is on the inside side of the inner circuit board behind the front panel. There are 2 fuses, top is 3.15 amp and the botom 2.5 amp

janome memory craft 6600p It runs fine for a little while then it binds up tight and I get an E5 error message. Sometimes if I shut it off and leave it overnight and come back it's like ...

...Memory Craft 6600p and Janome 15000. What do I need in order for these machines to function properly in North America? You probably need an electrical adapter to convert from their power to US

Janome mc 6600 manual was lost in a recent move, can I download one online? I found one for the 6600P but not the 6600 - would the manual be the same for both machines? Thanks much! You can probably ...

Janome 6600p: E2. After cleaning the Janome MC 6600p machine under the needle plate, the ERROR E2 appeared and it stopped sewing. What am I to do? ...

I have a Janome Memory Craft 6600P sewing machine. Do I need a high shank or a low shank for free motion quilting? It Will be a Hi shank...one did come with the machine,