Questions & Answers for: jandy pool remote wet

Jandy Aqualink RS4 controller won't turn lights on/off aux buttons for spa, pool and back lights at the main control panel, or the RS4 all button contoller, and the spa and pool lights at the remote 4

...pool with the Jandy PowerCenter, then the main problem is probably that the powercenter is not getting the power to the one-touch. Hence the powercenter would need to be repaired. These Jandy boards ...

my remote got wet and now it is not working. How do I fix? You can try to open it up and dry with a hair dryer. If this dosn't help you will probably need to get a new one.

jandy pda (pool remote) got wet inside, kids left out in rain and water must have got in behind controls now it does not turn on. What can I do? Were you ever able to repair it? Our kids recently left

jandy one touch control panel model 8156 - spa turns on when pool is on sometimes when the pool filter is suppose to be on the spa comes on as well. The spa is not programmed to be on. how do I fix ...

...Jandy remote was backlit. I bought acreplacement unit but it does not light up. my pool guy says there's a way to turn the light on, but I can't find it. It's under Equipment, ...

Jandy 8265 got wet and does not work. Can I just buy a new one? If so, how do I install it once it gets here? when new one gets there it should work make sure if old one is 800 meghts so is new if not

need to set t stat on lzr jandy heater turn heater to off mode hold mode pool and spa buttons down until you get to set up mode page down to you see remote scroll to remote t stat then turn on heater

...Jandy PS6, still flashing red and green Pool circuit breaker keeps tripping when turned on by Jandy remote. Reset remote and red and green lights are still flashing? Any suggestions? Electrician and ...

...Jandy ePump was working fine until it was splashed with water during a filter cleaning. It no longer powers up and my Aqualink indicates the ePump is offline. open up the power box see if still wet ...