Questions & Answers for: jack stands pontiac grand

...jack jack stands sockets and socket wrench safety glasses PROCEDURE: 1. raise your car at all four points, with jack stands 2. drain your oil 3. there will be multiple bolts surrounding your oil pan ...

...jack stands or blocks, take off tire, take brake calipar off, brake calipar braket, take off rotor, take off axel hub nut, and the 3 bolts that hold the hub assembly on, then bang it off with a good ...

Where do the jack stands go on a 1997 Grand Prix? you can put jack stand under the chassis, or under a cross section,

...2.4, need to replace starter motor. How do I access it? if you have jack stands use them with a floor jack, front of car two or three 10 mm bolts remove the plastic cover, then use 15 mm socket ...

...jack. Rock the car back and forward slightly to assure it will remain stable.7) Slide under the Grand Am head first and locate the starter. It will resemble a large elongated golden or black capsule. ...

...empty tank of gas when dropped slowly you unhook gas lines and dis connect wireing then pull tank out remember to put vechicle on jack stands firmly 1st then go slow remembering the way you got it ...

...jack stands? it calls for 5W-30 but in those temps, assuming you have a fair amount of miles, use 10W-40 or if you can find it, 5W-50-unless your's is a leaker, use full synthetic too, it is MUCH ...

...sub frameto put your floor jack on,hopefully you have oneYou may have to raise it up,put wood under the tires,then position your jack stands, etc under where youintend to support it,to work on ...

...jack and stands to replace the serpentine belt and water pump on my 98 Grand Am GT 3.1? I will have to remove a motor mount that is over the top of the belt and I don't want to damage anything in the ...

jack and stands to replace water pump and serpentine belt on 98 grand am gt I have to remove motor mount over top of serpentine belt but don't want to damage anything in the proses I have been looking