Questions & Answers for: iu needs replaced

Indiana (IU) Fossil Kaleidoscope watch You are supposed to be able to push a button and change the face of the watch from gray to red with IU emblem on it. The watch runs fine but the IU face will not

...IU light ON or it is asking for a PM? It is just a counter in the copier that say's it time to replace the PM parts. They may have been replaced , but the counter was not reset. On a final note, this ...

...you have what looks like a front view of a camera lite up orange or flashing? If so, you need a new IU unit/ drum & cln blade & developer most likely sold sepperate. I don't think they make the whole ...

...IU Motor is turning. The sensor in the developer unit has failed. In some cases this code will occur after a PM where the developer was replaced and calibrated but the developer or drum counter was ...

...parts its need or Replace Chip on the image unit Take the front plastic cover off the black IU and you will see the chip (a small pcb ) that you need to replace. Unplug the connector and ...

...IU 5387. When should these IUs be replaced? What is the expected number of copies to be expected from new IUs? Replace when machine tells you to. But in this case looks like the Magenta and yellow ...

...Basically, you need to replace the drum unit & the developer or you can buy a rebuild kit to rest the "IU" counter. There is a fuse that needs to blow in order to rest the counter...... Good ...

p9 IU black image unit needs to be replaced as that code refers to color registration.

...c252/products.html push down, slide out, pull tapes and fixtures off new unit(s) and replace. These IU's have chips in them to keep track of life. Another option instead of replacing the unit is to ...

Have a konica minolta magicolor 8650 with this message on the screen IU need to be replaces YMC , Only black printing possible , machine status 8/21 Can it be cleared? No you need to replace the I/U's