how can i descale this iron as it is gummed up by overuse and misuse and needs a thorough clean out as at the moment it is whistling quite bad when the steam is generated any ideas Pour vinegar in the
I have a SIMAC steam iron that isn't performing well at the moment. I think it needs descaling as it is making a large whistling sound when I turn it on and it has heated up. Can someone tell me ...
Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer
...whistle). It seems to be perfect apart from on channel 1, the sound is very low and when I press the MUTE switch, it crackles. So I'm thinking the fault is probably with the mute switch. Would ...
Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer
tefal 8460 sole plate needs replacing- is it the same as the (readily available) sole plate for tefal 8360? It probably is, 8460 is likely a newer style with few more bells and whistles..like the anti
russell hobbs support I called russell hobbs last week about a whistling noise coming from the iron , they said to des ale it again which I have done and still whistling ????? Clean the orifices on ...
Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer
My steam iron is making a whistling noise when I put the steam on, what is the problem Steam is coming out with some pressure, so it will make noise. Also the boiling water will make noise. That would
Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer
The whistle on my wife's Villaware Model 2004 Waffler is driving her nuts, which is driving me nuts. Does anyone know how to stop it from whistling when it thinks the waffle is done? Villaware Model ...
Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer
My Rowenta steamer tank leaks steam with a loud whistling sound after about 10 minutes of being turned on. please help. The tank must have corroded through, have a local appliance repair look into a ...
Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer
my tefal gv8960 is making a whistle noise and steam caming from botton base Your Tefal iron has failed.
Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer
When I go to iron the base part of the iron in which the iron sits starts to whistle and blow out a lot of steam. Are you able to assist? Sounds like a seal has blown. Time for a new iron, I would say
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions