...iRobot. I Love Scooba and wish great success on next upgrade. My suggestion guys. Pls. make Dirty-Tank's High-Limit level-sensor visually inspectable and possible to clean manually with no ...
scooba 5800 It vacumms but it does not release any water. Tank is full. What do i do? did you try priming the pump? I had this problem several times. Once I needed to realign how I had inserted the ...
...irobot and do a search for how to do this. I also had difficulty opening my scooba. Press down with the palm of your hand on the back silver plate as you push down on the silver release ...
...the pump with water. The iRobot website shows how to do this under the Scooba troubleshooting section. Then run the unit with water and vinegar (in place of the Clorox Cleaning Solution) if
...Prime Scooba's pump, as described here, but use water instead of air to prime the pump. Water is more effective. You'll have a little puddle under the robot if you've been successful. Then rinse the ...
check tank Prime Scooba's pump with water and rinse the four ports on the underside of the tank very, very thoroughly with warm water. That should take care of it.
...Scooba floor cleaner "check tank" light stays on even after it's refilled and everything cleaned but still will not work. It just keeps beeping at me when I try to start it. How do I reset it or get ...
iRobot Scooba 5800 "check tank" light I am hoping to buy a used Scooba 5800. The current owner has had it stored for a while, and it worked fine before storage..now it needs a new battery bc it will ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions