Question about Automatic Salt Water System for Above Ground Saltwater Pool
intex salt system sucks. Once you set it for the # of hours to chlorinate you are basically guessing as to what is needed. Yes there is a guidence chart as to hours to run but it is over kill and lets
Question about Automatic Salt Water System for Above Ground Saltwater Pool
system keeps reading 90 low water flow. i have cleaned all filters and checked hoses. The pool is taking in and putting out water as it should. what could be the problem? Check your stablizer level in
Question about Automatic Salt Water System for Above Ground Saltwater Pool
Intex salt water chlorinator I added a higher flow pump and chlorine levels seem low no matter how many hours I run the chlorinator your pump has nothing to do with chlorine generation. You need to ...
Question about Automatic Salt Water System for Above Ground Saltwater Pool
intex frame pool with a salt water pump /chlorinator system. i have put the required amount of salt in 75 kg and it has fully desolved. the alarm keep coming up on the pump 91 code -low salt level....
Question about Automatic Salt Water System for Above Ground Saltwater Pool
salt water system from reading low flow start by unscrewing the ring around your sensor and remove it. Although most likely not the problem proceed with blasting it out and making sure it moves freely
Question about Automatic Salt Water System for Above Ground Saltwater Pool
...intex chlorinators are made the same but they are not exactly calibrated the same. They are close but not close enough so were one system might read the salt content ok the next may not I am not sure ...
Question about Automatic Salt Water System for Above Ground Saltwater Pool
...Intex 12x4 and are using the pump that it came with, so, why would it say low flow all the time??? It says low flow because that is what is happening. You either have air in the system, or blockage ...
Question about Automatic Salt Water System for Above Ground Saltwater Pool
...Salt Water System it worked great... Then after about a month and a half, the water started to get cloudy. The system kept giving the "91" Low Salt code and beeping. We then added the right amount of ...
Question about Automatic Salt Water System for Above Ground Saltwater Pool
intex salt water chlorinator/sand filter/pump and it's reading low salt code 91, but when I test he water it says I'm at 6,000 ppm over twice the normal level of 3,000ppm. Not sure if I have a
Question about Automatic Salt Water System for Above Ground Saltwater Pool
...salt water system soon after adding a bag of salt. Now I'm getting a low flow warning even though there is plenty of flow. What could the problem be. I have been reading some input that says you ...
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions