Questions & Answers for: intex pool salt water chlorinator

Question about Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

...intex 24 x24 pool? I have had the water tested and everything else in the pool is balanced and ready to go except it shows no chlorine? Got generator running and no chlorine, right amount of salt is ...

Ad

Question about Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

...pool water is yellow and think it is because low chlorine I was going to add more salt and run the intex chloring generator longer Will this cure the problem Is there such thing as salt strips or are ...

Ad

Question about Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

...Intex inflatable pool and am getting no error codes after running the saltwater system. although you are close to the amount of salt that is recommended all pools are just different enough that the ...

Question about Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

...pool it is not working fast enough. Please help! with the intex system it can read 91low salt and 92 high or vise versa you can have high and it will read low start by draining 20% pool water and re ...

Question about Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

...intex saltwater system pool is cloudy we just drained cleaned refilled new salt and filter and in just a few day our pool is cloudy The chlorine level maybe too low and it is allowing algae to start ...

Question about Automatic Salt Water System for Above Ground Saltwater Pool

0 Answer

intex salt water chlorinator/sand filter/pump and it's reading low salt code 91, but when I test he water it says I'm at 6,000 ppm over twice the normal level of 3,000ppm. Not sure if I have a

Question about Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

salt water system light green, no error code, timer counts down... but no chlorine... Help! There is a small wire mesh inside the unit that measures the chlorine/salt ratio. If it is a few years old ...

Question about Krystal Clear Saltwater System Pool Chlorinator 54601e

2 Answers

...intex 16x42 metal frame pool that came with a krystal clear model 637R filter pump. i ran the filter for 24 hrs after putting in the salt as instrusted. after 24 hrs i turned on my krystal clear ...

...intex saltwater/filter combo pump. It keeps reading code 92, high salt. I haven't put any salt in it lately and when I test it with test strips it's showing a very low chlorine level the chlorine is ...

...pool and chlorinator up it is brand new today it keeps reading code 92 but doesn't light up saying low or high salt. Is the chlorinator faulty? I have an intex 18ft x 9ft x 52inch all other levels ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13522 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...