Questions & Answers for: intertherm furnace pilot light

Question about Intertherm Heating & Cooling

1 Answer

...instructions. No Spark Try lighting all other gas appliances first. On a new setup air in the lines between the tank and the furnace takes time to bleed out before the gas reaches the pilot

Ad

Question about P3RA-048K Air Conditioner

2 Answers

Intertherm furnace pilot won't light I have an intertherm MGHA-090AAAPQ-01. I cannot get the pilot to light. I took of the pilot line at the control box and there is no gas coming out there. I tried ...

Ad

...InterTherm MGBB 070 Furnace? How do I light the pilot on my InterTherm MGBB 070 furnace? I have tried holding in the pilot switch but have had no success in getting the pilot lit. Just to make sure ...

Intertherm furnace Model Number MG 068A? Hello, if the Furnace is a standing pilot then turn the knob on the gas valve to pilot, you will hear a hissing sound then use a match or a lighter to light it

Question about P3RA-048K Air Conditioner

1 Answer

...in the Intertherm Gas Furnace The wind is probably not the culprit here. You probably have a crack in the heat exchanger, which allows the air from the blower to escape and blow out the pilot

Question about P3RA-048K Air Conditioner

1 Answer

intertherm furnace M1BG wont fire Furnace will not. fire regardeless what we try, Have replaced the thermocoupler. The fan will run Manually if turned on manually. The pilot light is lit, it just wont

Question about 56000 Btu Gas Furnace

0 Answer

INTERTHERM NO HEAT OR BLOWER i have the above furnace in a mobile home that has stopped giving us heat the blower only works on manual and there is no heat at all but the pilot light is lit and stays ...

Question about 56000 Btu Gas Furnace

1 Answer

pilot light won't light Will it initially light, then go out when you release the button? If yes, then change/adjust the thermocouple or pilot size. If no, then check that you have a gas supply, that ...

Intertherm gas furnace in mobile home..igniter comes on then nothing tries to fire byrners but nothing Cleaning filter, and vaccuum inside components. Shutoff and restart switch on and off. Test ...

Intertherm furnace MGH 075A pilot light won't light (propane) check pilot generator possible blocked gas line Propane or any gas will only burn under two conditions. 1, Enough gas in the air 2, Enough

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...