Questions & Answers for: intermatic push pin timers

...Intermatic 111c timer which I have connected to a nightlight. I am not sure how to set it. Do I turn the nightlight on and then put the red/green pins in on the timer? Should the override switch be ...

push the lever on-and-off. http://waterheatertimer.org/images/WH-Off-pin-pushes-lever-400.jpg Two types of pins, ON and OFF: You need a brass-colored OFF pin to turn off the circuit. You need a silver

...pin http://www.grainger.com/Grainger/INTERMATIC-Timer-Tripper-2E054?Pid=search The ON-OFF pins rotate around until they come in contact with a lever. The clock motor pushes the pin forward until it ...

push the lever >> new Intermatic timers have a bit of white grease on the lever where trippers contact 4) Test the manual override to see if it clicks back and forth crisp and clean >> the

...push the lever, but not enough to trip it fully. If timer has been working fine up until now, you probably need a new tripper pin ...

...intermatic TN 300 model lamp timer and I forget how to set the timer...?? This answer is a little misleading. ALL the pins between the time you want the lamp on to the time you want it off must be ...

...Intermatic mechanical timers physically pull and push contacts together-apart. Take trippers all the way out and see if that changes. Turn off 240V circuit breaker and see if that changes. Add a ...

pin for it to work properly You have Intermatic sprinkler timer. The silver pin inserts into the yellow dial at 12:00 midnight, and it rotates the skipper wheel. Skipper wheel is necessary only if you

...If you have analog plug-in timer, open following link to see how to set timers: ...

Intermatic image of 14-day skipper wheel, and you can see (what I assume) is the skipper pin pushing a lever. http://waterheatertimer.org/images/Sprinkler-day-skipper.jpg Attach close-up photo of your