Questions & Answers for: instructions carrier fan board

fan and solenoid valve don't kick in, when the blower starts. Please help!! The connection I made is: HUM to humidistat, humidistat to humidifier, and humidifier to COM (as instructed by Carrier 58STA

...Carrier Product 58GP-050---111EA Model 58GP050-EA Serial # 2791A02092 Have replaced fuse, checked Ckt Brkrs and other fuses, manualy engaged compressor relay (outside), searched for any frayed or ...

...carrier out. now remove the metal clip and the pieces of mirror. replace the tunnel (rod), put the clip back on, and reverse the procedure. now, the 2 set screws on the side are to adjust the image, ...

instructions for this feature. On these thermostats, check the back of the first piece for a gas/electric pin is set for your system. Also the low voltage setting is right also. All connections at the

Carrier gas heater is out, hot/metallic odor. Any recommendations to make Replaceming it go any smoother? instructions? Piece of cake remove the two screwa and slide it out. On some you can just leave