...3 liter, Rocker nuts back off at idle 4.3 liter engine, Have installed head gaskets and reassembled engine, but once valves were adjusted, the rocker arm nuts have no tension and back themselves off ...
...new cylinder head bolts. Tighten the cylinder head bolts a first pass to 44 ft lb (60 Nm). Tighten the cylinder head bolts in sequence an additional 95 degrees. Install the intake gasket. Install the ...
...rocker springs before installing the exhaust side rocker shaft and rocker arm assembly. * Install the exhaust side rocker shaft assembly in the engine. Tighten the rocker shaft mounting bolts ...
rocker arms on 3.1 liter chevrolet engine Install the pushrods in their original location, making sure they seat in the lifter sockets. Install the rocker arms and ball, then tighten the nuts to 14-20
...rocker out of position. I had the same problem with more than one coming off because once one comes of it starts spitting and sputtering which can cause more to get thrown. I solved the problem by ...
...new gasket. Torque the rocker cover bolts to 89 inch lbs. (10 Nm).PCV valve and hoseHeater bypass pipe. Torque the screw at the water pump to 106 inch lbs. (12 Nm), the bolt at the cylinder head ...
Question about 1996 Grand Cherokee
...rocker arms on a 1996 jeep grand cherokee 5.2 liter its in the FSM. want to read that for free. see chapter marked ENGINE> chapter 9 ZJ jeep it is. there is no such thing, sorry here ill paste the ...
Question about 1996 Caravan
...repair guide on your rocker arms,you can join their site like me for free and use all their repairs guides,need more help,let me know,k. Repair Guides Engine Mechanical Rocker Arm shafts AutoZone ...
Question about 1996 Caravan
...rocker arms on a 1999 nissan frontier 3.3 liter engine, is there a diagram with the proper layout? The rocker arms should be the same for Inlet and Exhaust. I can't find any spares supplier that ...
Question about 1996 Caravan
...specs for rocker arms in a 2000 impala 3.4l v6 The 2000 Chevy Impala 3.4 liter engine rocker arm bolt torque specification is 45 pounds. The rocker arm bolts should be torqued in 15 pound
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
