Questions & Answers for: installing hunter ceiling fan light

hunter fan/light control wiring model 27182... 3 wires, red black and green. which wires go to where. solution depends on how many wires are in the ceiling box. was there a ceiling fan in place before

...hunter fan controls · If you installed more than one remote-controlled ceiling fan, set the DIP switches on both receivers and the control of one fan to an identical alternate sequence (such as "all ...

Hunter ceiling fan. Lights and fans turn on and off by themselves.Both fans are on the same wall switch and are operated by separate remotes. I just installed a 2nd hunter fan model 23811 that also ...

...Hunter 2 wire fan and light control 27186. I have two wires coming out of the ceiling along with a ground and I can figure out how to connect those; however, how do I connect the Light Out, Fan Out, ...

...hunter ceiling fan. The fan works fine but I can not get the light to work. It's possible whoever installed the fan originally, did not connect the black/white striped wire to the electric box. Drop ...

...for our ceiling fan, Hunter, Park need the installation manual for our ceiling fan, Hunter, Park Hill, model 20578 i have to fans close to each other i would like to change the code on the ...

Installing fan & light control (27182) - in the box, there are red, white and black wires. On the control, there are red, blue and black. So, black to black; red to red; right?....does blue go to ...

...LEAD,White-Nuetral and Ground. I am trying to wire up a Hunter 27182 ceiling fan & light control with Black(which i know goes to my Hott-black wire),White and Ground. so what is your ...

...hunter ceiling fan with light & remote control but the fan will not shut off or change speeds Sorry for this::::You may not have the correct remote for the fan.  The fans are difficult to ...

...hunter ceiling fan,it has 4 wires. I assume your light is flickering. Here is a post by an electrician ...