Questions & Answers for: how to install thermostat

...thermostat Install the thermostat. Install the thermostat housing and gasket. NOTE Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that ...

Ad

Question about 2001 300M

1 Answer

...Install thermostat with the bleed valve located at the 12 o'clock position, between tabs on seal. Install thermostat and seal into thermostat housing . If removed, install two studs. Install ...

Ad

Question about 2000 Concorde

1 Answer

...Install thermostat with the bleed valve located at the 12 o'clock position, between tabs on seal. Install thermostat and seal into thermostat housing . If removed, install two studs. Install ...

Question about 1999 Alero

1 Answer

Install the thermostat. Install the thermostat housing to water pump feed pipe. Install the thermostat housing to water pump feed pipe bolt. Tighten the thermostat housing to water pump feed pipe bolt

...install thermostat? Thermostat Removal & Installation 3.4L & 3.5L Engine To Remove: Drain the coolant below the level of the thermostat. Remove the air cleaner and duct assembly. Remove the ...

Question about 2004 Envoy

2 Answers

...Install the thermostat housing to the engine block. Install the thermostat housing bolts and tighten to 89 inch lbs. (10 Nm). Lubricate the inner diameter of the radiator hose with engine coolant. ...

Question about 2004 Envoy

1 Answer

Install the thermostat. Install the coolant housing pipe. Install and secure the transaxle support-to-engine block mounting bolts. Install the engine splash shield. Install the wheel and tire assembly

Question about 2002 Rendezvous

1 Answer

...Install the thermostat on the engine. NOTE: Apply RTV sealer to the thermostat housing bolt threads. Install the thermostat housing and gasket with the mounting bolts. Tighten 18 ft-lb (25 Nm). ...

Question about 2005 Malibu

2 Answers

Install the thermostat on the housing. Install the water pump feed pipe on the thermostat housing with the mounting bolts. Tighten 89 in-lb (10 Nm). Fill the cooling system. 2006-2007 To Remove: Drain

...Install the thermostat. Install the thermostat housing. Install the thermostat housing bolts and tighten to 18 ft. lbs. (25 Nm). Install the radiator inlet hose to the thermostat housing. Install the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...