Questions & Answers for: install shock absorbers

...install: Fully extend the shock absorber stem, then push it up through thelower control arm and spring so that the upper stem passes through themounting hole in the upper control arm frame bracket. ...

...shock absorber bolt and nut from the U-bolt plate. Compress the front shock absorber and remove. Installation Insert front shock absorber into the front shock absorber mounting bracket (18183). ...

...Install the shock absorber-to-lower control arm retaining bolts and tighten to 20 ft. lbs. (27 Nm) on 1994-95 models and 54 ft. lbs. (73 Nm) on 1996 models, or 22 ft. lbs. (30 Nm) on 1997-99 models. ...

...shock tower hole. Install the lower shock studs into the axle bracket. Install the mounting nuts and tighten to 250 in. lbs. (28 Nm). Remove support and lower the vehicle. Install the upper grommet, ...

shock absorber To Install: Install or connect the following: Lower retainer and grommet on the shock absorber stud and insert shock absorber through frame bracket hole Lower nuts Torque to: 25 ft. lbs

install: Position the top of the shock absorber with the insulator attached into the suspension support. Install or connect the following: Upper shock insulator, retainer and nut. Torque the nut to 55

...shock absorbers at the lower attachment and install the attaching bolt. Lower the vehicle enough to guide the shock absorber upper stud through the body opening, then fasten the upper shock absorber ...

...Install the shock absorber in the vehicle and loosely tighten the upper shock absorber nut. Make sure the install the bushings and washers before installing the upper nut. For 4WD vehicles, install ...

...Install the shock absorber assembly onto the vehicle. Connect the brake hose and the ABS speed sensor to the shock absorber. Connect the stabilizer bar link to the shock absorber. Install the wheel ...

...Install the shock absorber onto the upper and lower mounting studs of the vehicle. Install the washers and retaining nuts. Tighten the upper and lower retaining nuts to 22-30 ft. lbs. (30-41 Nm) on ...