Questions & Answers for: install radiator

Question about 1998 DeVille

1 Answer

...inlet hose to the radiator. Install the cooling fans. Install the air cleaner assembly. Install the forward discriminating sensor. Enable the SIR. Refill the coolant. Hope this Helps and PLEASE RATE ...

Ad

Question about 2000 Venture

2 Answers

...radiator. Install the radiator upper hose to the radiator. Install the radiator lower hose to the radiator. Install the cooling fans with the cooling fan shroud. Install the engine mount struts. ...

Ad

...Install radiator mounting bracket assembly. Tighten bolts. Install radiator splash shield. Lower vehicle. Install upper tranmission oil cooler tube. Install upper transmission oil cooler tube clips. ...

...radiator. Install the lower radiator supports and tighten the bolts to 71-97 inch lbs. (8-11 Nm). Remove the jackstand and install the transmission cooler outlet line (if equipped) and the lower ...

...Install radiator inlet neck. Torque fasteners to 55 inch lbs. (6 Nm). Connect the upper radiator hose to radiator. Align hose and position clamp so it will not interfere with the engine or the hood. ...

Question about 1997 Mountaineer

1 Answer

...radiator, install protective caps over lines and position aside. Remove two upper radiator bolts. Tilt the radiator back (rearward) approximately 25 mm (one inch) and lift directly upward, clear of ...

Question about 1999 RAV4

0 Answer

...bolts. Torque: 5.0 Nm (43 inch lbs.) w/ A/C: Install No. 2 cooling fan to radiator, 3 bolts. Torque: 5.0 Nm (43 inch lbs.) Install the 2 upper radiator supports and 2 bolts. Torque: 13 Nm (9 ft.

Question about 2004 Pacifica

1 Answer

...Install radiator fan assemble, if removed. 3) Install auxiliary transmission cooler, if removed. 4) Slide radiator down into position. Seat the radiator with the rubber isolators into the mounting ...

...radiator. Install the A/C condenser mounting bolts and tighten to 115 inch lbs. (13 Nm). Push the upper and lower transaxle oil cooler pipes into the radiator quick connect fittings, until a "click" ...

...Install the radiator upper and lower hoses. Connect the coolant reserve/recovery hose. Connect the vapor purge solenoid to the mounting bracket. Install the radiator fans. Install the radiator upper ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...