Questions & Answers for: install new blend door motor

Question about 1998 Jimmy

3 Answers

new control switch assembly no luck. please help if the blend air door keeps cycling even if the setting is hot or cold this tells you that the thermostatic control sensor is bad. replace that and the

Ad

Question about 1998 Town Car

1 Answer

new motor in, it worked very little. Must the window in the down position to put it in . My switch is not working to let the window down do I use my hand to force it down? My car is a1998 Lin. towncar

Ad

...in the medium or cold position. sounds like you need a new blend door motor. this motor is in the heater box and controls the blend door that lets eather cold or hot air inn or a combonation of ...

Question about 2002 F250 Super Duty SuperCab

2 Answers

...the connector. Remove the two screws. Rotate the blend door actuator and bracket assembly. Remove the electronic blend door actuator and bracket assembly. To install, reverse the removal

...with a blow from a hammer and a screwdriver or punch. Then, if you don't have rivets to replace the removed ones, get a few bolts and nylon threaded nuts and use those to install the new window

Question about 1998 F150 Regular Cab

1 Answer

...blend door or temp contrl switch is bad. Section 12-02: Heating and Defrosting 1998 Windstar Workshop Manual REMOVAL AND INSTALLATION Actuator Motors, Electric Temperature Blend Door Removal Remove ...

install heater door with temp swithched to the middle, move door to middle, if not you need to place new motor into plug before installing and turn temp to cold, then turn by hand the white blend door

Question about 2004 Freestar

2 Answers

...blend door actuator. Install the temperature auxiliary temperature blend door actuator screws. Connect the temperature auxiliary temperature blend door actuator connector. Install the right rear ...

Question about 2000 Caravan

1 Answer

...new anti freeze help Most likely the problem is a broken blend door inside the heater box or a broken adjuster cable going to the blend door, the blend door inside the heater box is responsible for ...

...blend door motor replaced with new motor before installing motor plugged motor into harness to test changed temp new motor does not operate is there a fuse just for blend door motor system cools and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...