Questions & Answers for: install exhaust

Install the exhaust flex pipe. 6. Install the exhaust flex pipe retaining nuts to the exhaust manifold. Tighten Tighten the exhaust flex pipe?to?exhaust manifold retaining nuts to 35 NSm (26 lb?ft). 7

...Install a new exhaust gas recirculation valve gasket. Position the EGR valve and install the bolts. Install the vacuum hose. Connect the EGR tube. Install the idle air control valve. For additional ...

...Install the exhaust manifold using new gaskets. Install the manifold-to-cylinder head nuts, follow the tightening sequence and tighten to specifications. Raise and support the front of the vehicle. ...

...exhaust manifold. Install attaching nuts and tighten to 34-47 Nm (25-35 lb-ft). Position the secondary air injection check valve tube and the secondary air injection tube gasket (9C435) at rear of ...

...Install the exhaust manifolds. Tighten the fasteners in sequence as follows: Step 1: 15 ft. lbs. (20 Nm) Step 2: 15 ft. lbs. (20 Nm) Install or connect the following: Exhaust Gas Recirculation (EGR) ...

...Install: Exhaust manifold 2.4L Install new exhaust manifold gaskets. Position the exhaust manifold on the cylinder head. Tighten the mounting bolts in sequence to 110 in lbs (12.5 Nm). Raise and ...

...install the exhaust manifold. Make sure to following the tightening sequence and torque specifications given in the exhaust manifold procedure located in this section. Raise and safely support the ...

Install or connect the following: Exhaust manifold. Torque the M8 mounting nuts to 22 ft. lbs. (29 Nm) and the M10 mounting bolts 36 ft. lbs. (49 Nm). starting from the middle and working outward. O2S

...Install exhaust crossover pipe. Connect the surge tank line fitting to the coolant outlet. Tighten the fittings to 15 ft lb (21 Nm). Install the air cleaner. Fill the cooling system. Inspect the ...

...Install the exhaust crossover pipe. 2. Install the exhaust crossover pipe studs/nuts. 3. Tighten the exhaust crossover pipe studs/nuts to 18 lb ft. 4. Install the exhaust crossover heat shield. 5. ...